Make sure your ZipDesk is set up, plugged in, and powered.
Your desk came with a Bluetooth dongle that will be used to control your desk with the app so make sure that is installed as shown here:
Download the iMovr Ergodynamics App using the link or download directly from Apple's App Store.
(Android version coming soon.)
Once downloaded, open your app and accept the Bluetooth permissions to be able to control your desk.
Once accepted, you will then be on the home screen, ready to connect to your desk. To do this, press the "Connect" icon on the menu bar at the bottom of the app.
Click on the + icon on the Discovered Device button.
If you have multiple desks, match the device ID to the number that is on the Bluetooth dongle.
Enter a name for your desk and press the save button.
Tap Control on the menu bar at the bottom of the app to go back to the main page. You are now connected to your desk.
You can move your desk UP and DOWN by pressing and holding the ∧ and ∨ buttons.
Move your desk to your desired position and tap the + icon to save your present setting. Give that setting a name like sit, stand, or walk. Then press Done and your position will be saved.
Repeat this process for all of your desired desk heights. Now you can touch and hold your preset to move your desk to your saved height.
The app stores 6 memory positions. Tap the arrow button to see three additional height settings reserved for future features of this app, specifically for creating combo settings to command an electric monitor arm, office treadmill or other future iMovR Bluetooth-synced device together with your desk. Press the arrow button return arrow again to switch back to the first 3 settings.
Note: The hand controller on your ZipDesk also has 3 memory positions, which are independent and separate from the 6 memory positions saved in the iMovr Ergodynamics App.
You can move your desk to each preset height at the touch of a button. Tap the gear icon and switch your setting from Press & Hold to Touch & Go. Read through the safety disclaimer and agree to enable touch and go. Now you can raise and lower your desk to the preset height with one tap.
To interrupt AUTO-DRIVE at any time, press the STOP button, and the desk will stop moving.
Be sure to only operate your desk when it is fully visible and is free of obstructions in the desk’s movement path.